PosiStrobe DayLite

Rear Position / Strobe LED light

At only 30 millimeters in height (1.180 inch) the new PosiStrobe DayLite™ is a value light that does not sacrifice anything in performance or standards as other economy – priced lights offered by the competition. Our exclusive and highly advanced optics and chrome reflector system, our unmatched power and led management circuitry and our famous lowest-drag profile in the industry are all combined into a product that gives you unmatched POWER and FEATURES. Lower, narrower and shorter PLUS much lighter than industry lights in this category!

NOT APPROVED FOR INSTALLATION ON CERTIFIED AIRCRAFT
THIS IS NOT A TSO CERTIFIED LIGHT

Specification

PosiStrobe - rear position / strobe light
Dimensions (mm): 45.3 mm x 56 mm x 30 mm
Dimensions (inches): 1.785“ x 2.206“ x 1.18“
Weight (g): 67 g
Weight (oz): 2.363 oz
Operating Voltage Range: 9 – 18 VDC
Input Current – Position: 0.28 A @14V
Input Current – Strobe: 3.5 A @14V (peak)
Average Current Consumption per Frame – Strobe: 0.56 A
Average Current Consumption per Frame – Pos and Strobe: 0.8 A
Input Power - Position: 4 W @14V
Input Power - Strobe: 49 W @14V (peak)
Repetition Rate of Strobe: 48 cycles per minute
Fuse (Circuit Breaker) Recommendation: 5A for position
5A for strobe
Recommended size of mounting screw: M3, #6-32
Ambient Temperature: from -55°C to +85°C
from -55°F to +185°F
Overheat Protection: Yes (+85°C / +185°F)
Reverse Polarity Protection: Yes
Transient Voltage: 60V at 2sec max, both polarities
Under-Voltage Protection (lockout): Yes (9V)
Over-Voltage Protection (lockout): Yes (18V)
Waterproof, Dust-proof, Vibration-proof: Yes

Drawing

PosiStrobe JP - drawing

Specification Sheet

The user of this website is forewarned that the information presented herein is general and informational only. Aveo is not responsible for misinterpretations, typos, syntax errors, or translation mistakes as the legal and governing language of Aveo Czech is the Czech language.  Should there be any questions they should be directed to Aveo at info@aveoengineering,com for clarification or explanation. No liability is assumed or accepted for any activities based upon the user's use of anything presented herein.

©2024 Aveo Engineering Group, s.r.o. • All Rights Reserved. • PATENTS PENDING WORLDWIDE • Terms of Use • Privacy Policy

Any links to or use of material on our website without prior written permission will be aggressively prosecuted to the letter of the law worldwide

Log in with your credentials

Forgot your details?